Resin and Mastic
The special adhesive system for the stone processing industry.
As a result of a long run research work done by AKEMI, an assort-ment of improved and new AKEPOX products has been developed. The 2-component adhesive system is distinguished by its high properties for the specific fields of application, especially for outdoor use.
Properties: good adhesion on humid stones, alkali-stable, almost no shrinkage during hardening, low tendency to fatigue, hight mechanical properties,weather resistant bondings.
AKEPOX 2000
Liquid, for laminating work (sandwich bondings), filling offissures and work on horinzontal surfaces, easy colour macthing
Working time: 20-30 min
Hardening time: 12-16 hrs
Bending strength: DIN 53452 100 – 100- 110 N/mm^2
Tensile strength: DIN 53455 50 – 60 N/mm^2
E-module: 3000 – 3500 N/mm^2
600 g-ref.-no 106 17
.1.5 g-ref.-no 106 18
AKEPOX 2010
Gelly-like, for fine bonding joints, especially where jointsshould be invisible, for work on vertical surfaces, easy colour matching.
Working time: 20-30 min
Hardening time: 12-16 hrs
Bending strength: DIN 53452 100 – 110 N/mm^2
Tensile strength: DIN 53455 550 – 60 N/mm^2
E-module: 3500 – 4000 N/mm^2
450 g-ref.-no 106 16
2,25 g-ref.-no 106 23
15 g-ref.-no 106 24
AKEPOX 2020
Viscous, for filling of joints, casting of steel reinforcements,bondings on horizontal surfaces, levelling of irregularities,good adhesion on metal.
Working time: 40-50 min
Hardening time: 12-16 hrs
Bending strength: DIN 53452 50 – 60 N/mm^2
Tensile strength: DIN 53455 20 – 30 N/mm^2
E-module: 5500 – 6000 N/mm^2
750 g-ref.-no 106 10
3 g-ref.-no 106 20
22,5 g-ref.-no 106 21
AKEPOX 2030
Creamy, high non-sag properties, easy colour matching, for bondings on vertical surfaces, filling or bore-hotels for anchors, good adhesion on metal, rapid herdening.
Working time: 20-30 min
Hardening time: 8-10 hrs
Bending strength: DIN 53452 50 – 60 N/mm^2
Tensile strength: DIN 53455 20 – 30 N/mm^2
E-module: 5500 – 6000 N/mm^2
3 g-ref.-no 106 01
22,25 g-ref.-no 106 02
AKEPOX 2040
Paste-like, high non-sag properties, for bondings on vertical surfaces, levelling of big irregularities, fixing of tiles, good adhesion on metal.
Working time: 45-55 min
Hardening time: 12-16 hrs
Bending strength: DIN 53452 40 – 50 N/mm^2
Tensile strength: DIN 53455 20 – 30 N/mm^2
E-module: 8500 – 9000 N/mm^2
750 g-ref.-no 106 10
3 g-ref.-no 106 20
22,5 g-ref.-no 106 21